آی پی امداد
آی پی امداد
آریا الکترونیک parcham تکشو

اخبار: معرفی نرم افزار های کاربردی بوتیبل جهت تعمیرات هارد دیسک

pese

کاربر
2013-05-26
257
1,545
اصفهان
www.servicekaran.ir
[h=3]Conclusion[/h]
ViVard, DRevitalize and HDAT2 are simple and great software. They might be old programs but they get the job done. I had the best result using ViVard and DRevitalize. Remember that these software will not make your drive new. After running the repair process, I suggest you to save all data to another storage device. Good luck with your new list of great hard drive repair software.
 
  • Like
واکنش‌ها[ی پسندها]: milad_tm

pese

کاربر
2013-05-26
257
1,545
اصفهان
www.servicekaran.ir
Hard disk recovery process


ViVard is a free low level hard disk diagnosis and repair software. If your disk fails, it can be loaded during boot and there is a big chance that you can recover hard drive that has failed. Depending on its condition of course. But there is no harm in trying right? With this tutorial you can do it.Some of its features are as follows:​

  • [*=left]Perform hard disk device (HDD) surface tests
    [*=left]Recover hard drive by remapping bad sectors and replacing it with disk’s reserve area.
    [*=left]Permanently delete sectors or whole HDD. Data cannot be recovered after this is done. Useful if user wants to give or sell the storage device.
    [*=left]SMART information display.
    [*=left]Save result of test for future reference.





There are actually 2 ways to recover hard drive from the dead using ViVard. First is by remapping the bad sector and the second method is by erasing the HDD.The first method is best to be used if the bad sector counts on your HDD is low. Meanwhile the second method is useful if the first method failed. Warning: using the second method to recover hard drive will wipe out all data from your HDD.My suggestion would be to use the first method and if you are able to access your Operating System, backup as much data that is possible. Then if the problem persists, use the second method. Keep the second method has your last resort.
Prerequisite

Before we can proceed on how to recover hard drive, go here to get instruction on how to load Hirens Boot CD. Once it is loaded, go into Dos Programs and then Hard Disk Tools… Select ViVard 1.0 (Surface) and press Enter on your keyboard. Please wait until it automatically loads.
Method 1: Recover Hard Drive by Remapping Bad Sectors

1) On the main menu of ViVard, you will see you hard disk listed. Select the correct storage device and press Enter on your keyboard. The selected HDD will be shown on the menu’s left. Refer picture below.2) Use your keyboard to go down to Surface test with remap and then press Enter. This option is used to recover hard drive bad sectors.3) Another menu will pop up called LBA Range. Press Enter twice to select the whole drive surface from LBA 0 to maximum LBA.
ViVard-remap-recover-hard-drive.png
4) The process to recover hard drive will start. It will take some time depending on your HDD’s size. Once it is done, you can see how many errors and remaps were done during the test.
ViVard-process-complete-recover-hard-drive.png
5) A message saying Press any key to back to main window will pop up at the bottom of the screen. Just press any key.6) Choose Exit and press Enter. Once you are back on Hirens Boot CD menu, type shutdown and then press Enter. Press S on the resulting message. Now you have completed the process to recover hard disk using the software.
Method 2: Completely Erase All Data to Fix Faulty Disk

Before attempting this method to recover hard drive, read the description above. Warning: All data on your problematic HDD will be lost. 1) Similar to method 1, select the device that you want to erase and press Enter.2) Navigate to Erasing sectors or whole drive and press Enter.3) The LBA Range menu will pop up. Press Enter on your keyboard twice (to select 0 and maximum LBA).
ViVard-erase-recover-hard-drive.png
4) The recover hard drive process will start. Wait until it finishes and then press any key to return to ViVard main menu. Select Exit and press Enter.
ViVard-finish-erase-recover-hard-drive.png
5) You will be back on Hirens menu. Type shutdown and press Enter. Press S to initiate shutdown. The erase process is complete. You will have to reinstall new Operating System and your storage device will be useful again.
Conclusion

ViVard is a very simple and useful program to save your storage device from the dead. Best outcome can be achieved if you follow the instructions above correctly. I cannot promise that you will recover hard drive 100% but there is no harm in trying.
 
آخرین ویرایش:

pese

کاربر
2013-05-26
257
1,545
اصفهان
www.servicekaran.ir
[h=2]DRevitalize[/h]
DRevitalize is a simple and straight forward hard drive repair software. It has only one function, to repair and recover bad sector on a faulty hard disk. Basically you just have to run this program on boot and just select the drive you want to repair. It will start its process and after about 1 or 2 hours (depending on your drive’s capacity) your hard disk is repaired. I would recommend this hard drive repair software to first timers. If the problem persists after repairing your disk using DRevitalize, I suggest you try ViVard.
DRevitalize-hard-drive-repair-software1.png

[h=2]HDAT2[/h]
HDAT2 is similar to ViVard in many ways. It has more functions and supports more interfaces such as USB and SSD. It is popular among the advance users to diagnosis hard disk and repair bad sectors. This software displays much more information of the detected drives and it gives the user more control over the diagnosis process. You can even wipe your drive clean or resize its size with it. It also has something called Device Configuration Overlay (DCO) which allows the user to allow/disallow some feature sets of hard drive.
HDAT2-hard-drive-repair-software.png
In many ways this is a better hard drive repair software than ViVard but is a bit complicated to use. Not to worry, you can find the best tutorial to use this software to repair your drive here.
 
بالا